![simple cisco vpn setup on asa5510 simple cisco vpn setup on asa5510](https://3.bp.blogspot.com/-ae96T5DuDvY/Xo54yQYVdaI/AAAAAAAAlMw/HB3rXMkNhDIQldnPWA-EKPijIiBA7k-ngCK4BGAYYCw/s1600/AnyConnect%2BFail.png)
Using directions here http:/ / / broadband/ mtu_ping_test.shtml we ran a continuous ping to a host on the other side of the tunnel. On the other end, they have an ASA5520, but I'm not sure what it's sitting behind. That should give you a clue where the traffic stops and what to change.My ASA5510 sits behind the 2600. Is there traffic on the inside coming in?Īre reply packets being sent (and not answered)? Is IPSec traffic reaching the external interface of the ASA (probably udp/500)? Is traffic being sent out? (watch the coincidence of LAN packet and WAN packets)Īny WAN traffic coming in from the external IP address of the ASA (not for contents, just traffic)? You might even sniff on the tunnel interface if you had one.
#Simple cisco vpn setup on asa5510 windows
Open 2 console (ssh) windows and sniff the LAN traffic to the remote side, and sniff the traffic on the WAN port. If you can' t debug the ASA side then sniff the traffic on your side: That' s why you got several posts recommending interface-based VPN - no hidden features, same configuration as with other interfaces. I will stick to the FGT side, as I' m a non-Cisco guy.Īs I' m not using policy-based VPN anymore since v3.00 MR7 I am not sure if there is a visible active route when the tunnel is UP (there shouldn' t be any with the tunnel being down). and inside it select IPSEC encryption and created tunnel (ph1). but what?ĪFAIK if i go with policy based vpn i need to create one policy on LOCAL_LAN_IFACE -> PUBLIC_IFACE which is covering both directions of comm. Something is messed up on FG but i don' t get what. This means that icmp (ping) and tcp (80) - http should pass through tunnel. as you see i' ve inserted for source my 192.168.1.140 and for dest 10.10.10.100 which is ok if tha ASA config looks like:Īccess-list xxx extended permit ip host 10.10.10.100 host 192.168.1.140Īccess-list xxx_restrict remark riing_restrictĪccess-list xxx_restrict extended permit icmp host 10.10.10.100 host 192.168.1.140Īccess-list xxx_restrict extended permit tcp host 10.10.10.100 host 192.168.1.140 eq 80 i just don' t get what he expects from me as QMS' s. an created also policy' s for internal tunnel and wan1 tunnel all/all accept. i' ve added the route for 10.10.10.x to go to VPN_TUNNEL created as iface. If you need any more info i' ll be willing to provide. i' ve mostly configured tunnel on cisco' s. Pls if someone has experience with thing like this. I create policy' s to in/out internal and in/out/wan1. The same thing happens if a go with interface mode vpn. what' s the catch? after bringing up the tunnel i cannot ping nor access in any way 10.10.10.100 nor they can ping my internal 192.168.1.140 although VPN tunnel is up and the policy is created like: if i put for src addr my internal host ip to which remote client must get. Negotiate Received error notification from peer: INVALID-ID-INFORMATIONĭelete_phase1_sa Deleted an Isakmp SA on the tunnel to PUBLIC_IP_OF_ASA:500īut. if i let src and dest ip' s 0.0.0.0/0 i cannot bring-up the interface. I need only one IP from ONE subnet on remote net to access ONE host in my Internal network. QMS or Quick Mode Selector is the src and dest of IKE negotiator. (case is similar either i build interface based or policy based VPN, in this case i' ll stick with policy-based VPN)Īfter that i create a phase2 of this tunnel.ģDES, MD5. Preshared key, public IP of vpn server, mode is main, DHG 2, DPD disabled etc. according to instructions from remote conf of ASA. i have to take that info as correct from other side. ASA is configured and ACL' s are setted to permit all they should.
![simple cisco vpn setup on asa5510 simple cisco vpn setup on asa5510](https://i.ytimg.com/vi/qHvE1Z6tCR0/maxresdefault.jpg)
I need to enable one host from remote peer (location) where is ASA which i don' t have access to get to one machine (HTTP/S mainly) in my local (internal) network behind my FG. i have FG 60B and on the other side is ASA5510. i have an urgent issue with ipsec tunnel.